E-mail: lio@jiuxuindustry.com
Contact Us
Lio Li: +86-17317922758
Michael Ren: +86-13651966527
TEL: +86-021-67111005
E-mail: lio@jiuxuindustry.com
Address: Room 1006, Building One, Xinfu Road, Minghang District, Shanghai, China
Home > Exhibition > Content
Analysis of the Industry Standard of Packaging Machinery and Equipment Safety
Feb 02, 2018

Analysis of the Industry Standard of Packaging Machinery and Equipment Safety

1, Packaging machinery should be fixed in the obvious place signs, and indicate the normal operation of the machine or equipment required for the main technical parameters, such as: rated current and voltage, rated pressure and hot temperature.
 2, packaging machinery on the hydraulic transmission system safety requirements should be consistent with the provisions of GB3766, pneumatic system safety requirements should be consistent with the provisions of GB7932.
 3, the safety requirements of packaging machinery electrical equipment should be consistent with the relevant provisions of GB5226 standard.
 4, packaging machinery can cause personal danger of dangerous parts must take appropriate safety measures. For the relative movement of parts, such as clamping, cutting and other moving parts must ensure a safe distance to prevent the operator from being clipped or scissors. Hazardous transmission devices should be placed in the body as much as possible. Exposed components that affect the safety of human beings in rotating, moving or reciprocating motion must be guarded. Locations or protrusions exposed on moving parts must be smooth or guarded.
 5, mechanical operation may have loose parts must have reliable measures to prevent loosening.
 6, packaging machinery to be discharged waste, smoke exhaust. Appropriate devices should be fitted to avoid harm to the operator.
 7, packaging machinery only requires unidirectional motor rotation must be made in the motor or in the appropriate parts of the steering mark.
 8, personnel into the work area is more dangerous, should be set in the work area security guards. When the guard isolates the entire work area of the packaging machine, the hazardous parts in the work area may not be provided with a separate guard. Work zone guards set should ensure a safe distance.
 9, to be off-site operation or set up the whole packaging machinery should be equipped with a platform in line with the relevant standards and access to the platform ladder and guard railings and other appropriate devices.
 10, packaging machinery working agencies should have interlock protection in case of failure to make the machine or equipment to stop working.
 11, the general packaging machinery should be equipped with safety switches, in any emergency, press the switch that can shut down to prevent accidents.
 12, when the machine or equipment into the state before the need to remind all personnel to leave the danger zone in time the case, the packaging machinery should be installed warning device.
13, packaging machinery should have clear and eye-catching manipulation, lubrication, safety or warning signs. Safety colors and safety signs should be consistent with the provisions of GB2893 and GB2894, signs in the graphic symbols should be consistent with the relevant standards or regulations.
14, packaging machinery safety operating mechanism should be located in the operator easy to operate and control position.
15, in the explosive explosive environment packaging machinery, machinery and electrical installations should have reliable protective measures and comply with the relevant standards or regulations.

We specialize in the design and manufacture of large package and small package. Semi-automatic and automatic packaging machinery and supporting equipment provide various solutions for customers to meet different requirements of customers. Each machine can reflect the high cost performance .

Shanghai Jiuxu Industrial Co.,Ltd